Failed to retrieve item pricing information.
Zero-Leak Plug
- Zero-Lock Gold socket head standard (SAE J514/English)
- Clear zinc plated finish. ASTM B633 FE/ZN Type V=Zinc 0.00035" minimum thickness.
- Two seals, first seal is a metal-to-metal seal created by the engagement of a taper in the SAE J1926 or ISO 6149 port with a mating taper in the ZLG fitting design. The Engagement is several thousands of an inch long for minimal gap & high unit loading. This engagement also causes the removal torque to be greater than the insertion torque.
- The second seal is an elastomeric O-ring seal located under the taper in the ZLG fitting, which acts as a backup seal should there be a failure with the primary seal. The O-ring cannot be extrudede onto the spot face of the port, which prevents ZLG plug form "backing out" as SAE J514 ORB Plug conterparts are prone to do. They also cannot be fored into the interface of the threads of the plug or port where it could be nibbled or damaged.
- Thread port plugs which are interchangeable with plugs used in SAE J1926 standard ports.
| Item | Order Qty. | Mfr. Number | Thread | Allen Hex | O-Ring Size | Installation Torque |
|---|---|---|---|---|---|---|
|
$0.00/each |
22S-S02 | 5/16" - 24 | 0.125" | 6.0mm x 1.5mm | 2 Ft Lbs | |
|
$0.00/each |
22S-S04 | 7/16" - 20 | 0.188" | 8.0mm x 1.5mm | 7 Ft Lbs | |
|
$0.00/each |
22S-S06 | 9/16" - 18 | 0.250" | 12.1mm x 1.6mm | 11 Ft Lbs | |
|
$0.00/each |
22S-S08 | 3/4" - 16 | 0.313" | 15.6mm x 1.78mm | 28 Ft Lbs | |
|
$0.00/each |
22S-S10 | 7/8" - 14 | 0.375" | 18.0mm x 2.0mm | 46 Ft Lbs | |
|
$0.00/each |
22S-S12 | 1-1/16" - 12 | 0.563" | 22.3mm x 2.4mm | 51 Ft Lbs | |
|
$0.00/each |
22S-S16 | 1-5/16" - 12 | 0.625" | 27.0mm x 2.5mm | 100 Ft Lbs |
Page 1 of 1
- Email: info@hydraulicstore.com
- Phone: 800-323-5749
- Fax: 308-382-0253
-
3727 Westgate Road
Grand Island, NE 68803 - Copyright © 1989-2025 Trausch Dynamics. All rights reserved.
-
