Phone: 800-323-5749 / Fax: 308-382-0253 / Hours: 7:30am-5:00pm CST (Mon-Fri)
Shipping available for: United States Canada
  • MHSA approved hydraulic hose cover.
  • Designed to be consistently rugged and dependable for the long term.
  • Exceed by 2-1/2 times the abrasion resistance performance specified by ISO 6945 standard. This means increased machine uptime and productivity.
  • Resist ozone damage 5-1/2 times better than the DIN EN 27326 standard. This means maximized hose life.
  • Typical temperature range from -40°F to 212°F
  • Easy to read lay lines
  • Transfer of hydraulic oils and water
  • "Bite-the-wire" design. The teeth cut through the outer cover and bite into the steel of the hose.
  • One-piece from the connection to the stem. No brazing is involved in the manufacturing process.
  • Burst and impulse tests have been performed to over 1,000,000 cycles.
  • Easily identified. All 'A' Series crimp fittings have a single-line and double-line on their shells
HOSE ASSEMBLIES
Sort By:

HOSE ENDS

#4 JIC
#6 JIC
#8 JIC
#10 JIC
#12 JIC
#16 JIC
1/4" PIPE (NPTF)
3/8" PIPE (NPTF)
1/2" PIPE (NPTF)
3/4" PIPE (NPTF)
1" PIPE (NPTF)

LENGTH

1 FT.
1.5 FT.
2 FT.
2.5 FT.
3 FT.
3.5 FT.
4 FT.
4.5 FT.
5 FT.
6 FT.
7 FT.
8 FT.
9 FT.
10 FT.
11 FT.
12 FT.
13 FT.
14 FT.
15 FT.
16 FT.
17 FT.
18 FT.
19 FT.
20 FT.
21 FT.
22 FT.
23 FT.
24 FT.
25 FT.
30 FT.
35 FT.
40 FT.
45 FT.
50 FT.